Type “B” Manlid with compensating ring EN 14025 ADR EN 13445-3 PED
Our manlids and inspection covers are all designed, calculated and approved by RW TÜV according to PED (EN13445-3) and the ADR(EN14025).
Our welding procedures are also certified by RW TÜV according to ENISO 15614-1-2004.
The Type “B” Manlids with compensating ring are manufactured 110 high with a 8mm thick neckring or 85 high with a 10mm thick neckring and it is supplied full of:
- Neckring
- Cover
- Swingbolt in stainless steel + Nuts in brass/stainless steel
SEZIONE GUARNIZIONE 10x15/15x15 - R 1050/1200 | SEAL SECTION 10x15/15x15 - R 1050/1200
| Tiranti Points | Diametro DN Diameter DN | Spessore Virola Neckring Thickness | H= | Pressione MAX MAX Pressure | Materiale Acciaio INOX Material Stainless Steel | Codice Code |
|---|---|---|---|---|---|---|
| 6 | ø 500 mm (ø 19,70") |
8 mm (0,31") |
110 mm (4,33") |
4 bars | SS 304 | A352R |
| 6 | ø 500 mm (ø 19,70") |
8 mm (0,31") |
110 mm (4,33") |
4 bars | SS 316 | A353R |
| 6 | ø 500 mm (ø 19,70") |
10 mm (0,39") |
85 mm (3,35") |
4 bars | SS 316 | A346R |
| 8 | ø 500 mm (ø 19,70") |
8 mm (0,31") |
110 mm (4,33") |
6 bars | SS 316 | A347R |
| 8 | ø 500 mm (ø 19,70") |
10 mm (0,39") |
85 mm (3,35") |
6 bars | SS 316 | A345R |